- +46 (0)370 69 96 68
- service@herber.se
T-DRILL’s new Fully automatic servo-controlled Tube End Spinning Machine SPM-115 is designed for flat closing of copper and brass tubes. The machine has a fast cycle time, as the typical process time is only ~ 20–45 seconds depending on tube specification.
Ansvarig säljare | T-Drill
Process:
Tube is loaded, the clamps are closed, and tube is held stationary. Rotating tool is automatically fed against the tube end. The friction between the rotating tool and the tube heats the tube end and rapidly forms it. System offers rapid set-up and change-over: clamps are changed according to the tube size, the program is selected from the library and the machine makes the correct adjustments automatically. The user-friendly GUI with color touch panel guides the operator visually step by step.
The operation is completely electric, without hydraulics and pneumatics. This results in energy efficient, low loss process with high repeatability. The SPM-115 is also very quiet with less than 75 dB noise level.
Spinning: Flat closing Ø8–115 mm | 5/16” – 4-1/8”
Pipe material: Copper
Machine type: Industrial machines
Process: Tube End forming